SN74AS825ANT
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Additional Feature | WITH TRIPLE OUTPUT ENABLE; WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AS825 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Output Current | 48mA |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 3.5 ns |
| Family | AS |
| Logic Function | Flip-Flop |
| Current - Quiescent (Iq) | 73mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 48mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 13ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 90mA |
| Number of Input Lines | 5 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AS825ANT Overview
The item is packaged in 24-DIP (0.300, 7.62mm)cases. D flip flop is included in the Tubepackage. Currently, the output is configured to use Tri-State, Non-Inverted. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Through Hole. The supply voltage is set to 4.5V~5.5V. In this case, the operating temperature is 0°C~70°C TA. This D latch has the type D-Type. The FPGA belongs to the 74AS series. The list contains 1 elements. As a result, it consumes 73mA of quiescent current without being affected by external factors. It has been determined that there have been 24 terminations. The object belongs to the 74AS825 family. Power is provided by a 5V supply. A device of this type belongs to the family of AS. There is an electronic part that is mounted in the way of Through Hole. As you can see from the design, it has pins with 24. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. It runs on 5Vvolts of power. A total of 2ports are embedded in the D flip flop. The supply voltage should be maintained at 5V for high efficiency. As a result of its output current of 48mA, it is very flexible in terms of design. The number of input lines is 5. Furthermore, it has WITH TRIPLE OUTPUT ENABLE; WITH CLEAR AND CLOCK ENABLEas a characteristic.
SN74AS825ANT Features
Tube package
74AS series
24 pins
5V power supplies
SN74AS825ANT Applications
There are a lot of Texas Instruments SN74AS825ANT Flip Flops applications.
- CMOS Process
- Memory
- Balanced Propagation Delays
- Clock pulse
- Set-reset capability
- Frequency Divider circuits
- Buffered Clock
- Computers
- High Performance Logic for test systems
- Divide a clock signal by 2 or 4
