SN74AS874NT
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | TIN LEAD |
| Additional Feature | WITH CLEAR |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Clock Frequency | 125MHz |
| Family | AS |
| Current - Quiescent (Iq) | 133mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 48mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 10.5 ns |
| Power Supply Current-Max (ICC) | 160mA |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
SN74AS874NT Overview
As a result, it is packaged as 24-DIP (0.300, 7.62mm). Package Tubeembeds it. As configured, the output uses Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. Through Holemounts this electrical part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is at 0°C~70°C TAdegrees Celsius that the system is operating. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 74AS series. There should be no greater frequency than 125MHzon its output. The element count is 2 . T flip flop consumes 133mA quiescent energy. There are 24 terminations,The power supply voltage is 5V. The electronic device belongs to the ASfamily. The part you are looking for is included in FF/Latches. There is a 5.5Vmaximum supply voltage (Vsup). It operates from 5V power supplies. The D flip flop is embedded with 2ports. In addition, you can refer to the additinal WITH CLEAR of the D latch.
SN74AS874NT Features
Tube package
74AS series
5V power supplies
SN74AS874NT Applications
There are a lot of Rochester Electronics, LLC SN74AS874NT Flip Flops applications.
- Common Clocks
- Storage Registers
- Guaranteed simultaneous switching noise level
- Modulo – n – counter
- Storage registers
- Cold spare funcion
- Digital electronics systems
- Circuit Design
- Latch-up performance
- High Performance Logic for test systems
