SN74AS876NT
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Weight | 1.753503g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH PRESET |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74AS876 |
| Function | Master Reset |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 48mA |
| Number of Bits | 8 |
| Clock Frequency | 80MHz |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 3 ns |
| Family | AS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 142mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 48mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AS876NT Overview
24-DIP (0.300, 7.62mm)is the way it is packaged. There is an embedded version in the package Tube. Tri-State, Invertedis the output configured for it. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. A 4.5V~5.5Vsupply voltage is required for it to operate. A temperature of 0°C~70°C TAis used in the operation. A flip flop of this type is classified as a D-Type. The 74ASseries comprises this type of FPGA. You should not exceed 80MHzin its output frequency. The list contains 2 elements. It consumes 142mA of quiescent A total of 24terminations have been recorded. Members of the 74AS876family make up this object. An input voltage of 5Vpowers the D latch. Electronic devices of this type belong to the ASfamily. The electronic part is mounted in the way of Through Hole. This board has 24 pins. Its clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. An electronic part designed with 8bits is used in this application. The flip flop has 2ports embedded within it. High efficiency requires the supply voltage to be maintained at 5V. It offers maximum design flexibility with its output current of 48mA. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It is also characterized by WITH PRESET.
SN74AS876NT Features
Tube package
74AS series
24 pins
8 Bits
SN74AS876NT Applications
There are a lot of Texas Instruments SN74AS876NT Flip Flops applications.
- Registers
- Data storage
- Set-reset capability
- Common Clocks
- Computers
- Consumer
- Storage registers
- Functionally equivalent to the MC10/100EL29
- Patented noise
- QML qualified product
