SN74AUC1G74RSER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFQFN |
| Number of Pins | 8 |
| Weight | 5.301361mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74AUC1G74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 2.7V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 275MHz |
| Propagation Delay | 2.4 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 9.5 ns |
| Family | AUC |
| Logic Function | AND, D-Type |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 9mA 9mA |
| Max I(ol) | 0.009 A |
| Max Propagation Delay @ V, Max CL | 1.8ns @ 2.5V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| fmax-Min | 275 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 200000000Hz |
| Height | 600μm |
| Length | 1.5mm |
| Width | 1.5mm |
| Thickness | 550μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUC1G74RSER Overview
The package is in the form of 8-UFQFN. There is an embedded version in the package Tape & Reel (TR). As configured, the output uses Differential. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. A voltage of 0.8V~2.7Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 74AUC series. In order for it to function properly, its output frequency should not exceed 275MHz. The number of terminations is 8. This D latch belongs to the family of 74AUC1G74. The D flip flop is powered by a voltage of 1.2V . The input capacitance of this JK flip flopis 2.5pF farads. Devices in the AUCfamily are electronic devices. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 8. In this device, the clock edge trigger type is Positive Edge. It is included in FF/Latches. Flip flops designed with 1bits are used in this part. In this case, the maximum supply voltage (Vsup) reaches 2.7V. The superior flexibility is achieved through the use of 1 circuits. Considering its reliability, this T flip flop is well suited for TR. This D latch consumes 10μA quiescent current at all.
SN74AUC1G74RSER Features
Tape & Reel (TR) package
74AUC series
8 pins
1 Bits
SN74AUC1G74RSER Applications
There are a lot of Texas Instruments SN74AUC1G74RSER Flip Flops applications.
- Registers
- Bus hold
- Frequency division
- ESCC
- Counters
- Control circuits
- Individual Asynchronous Resets
- Computers
- Parallel data storage
- High Performance Logic for test systems
