SN74AUC2G80DCTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) |
| Number of Pins | 8 |
| Weight | 23.388357mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AUC2G80 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Inverted |
| Polarity | Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 275MHz |
| Propagation Delay | 2.4 ns |
| Turn On Delay Time | 5 ns |
| Family | AUC |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 9mA 9mA |
| Max I(ol) | 0.009 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 1.8ns @ 2.5V, 30pF |
| Prop. Delay@Nom-Sup | 3.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.3mm |
| Length | 2.95mm |
| Width | 2.8mm |
| Thickness | 1.29mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUC2G80DCTR Overview
The flip flop is packaged in 8-LSSOP, 8-MSOP (0.110, 2.80mm Width). The Tape & Reel (TR)package contains it. T flip flop is configured with an output of Inverted. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Surface Mount. A voltage of 0.8V~2.7Vis required for its operation. In this case, the operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. It belongs to the 74AUCseries of FPGAs. A frequency of 275MHzshould be the maximum output frequency. There is 10μA quiescent consumption. It has been determined that there have been 8 terminations. The 74AUC2G80 family contains it. Power is provided by a 1.2V supply. A 2.5pFfarad input capacitance is provided by this T flip flop. In this case, the D flip flop belongs to the AUCfamily. Electronic part Surface Mountis mounted in the way. This board is designed with 8pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is included in FF/Latches. Due to its superior flexibility, it uses 2 circuits. Considering its reliability, this T flip flop is well suited for TR. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
SN74AUC2G80DCTR Features
Tape & Reel (TR) package
74AUC series
8 pins
SN74AUC2G80DCTR Applications
There are a lot of Texas Instruments SN74AUC2G80DCTR Flip Flops applications.
- Digital electronics systems
- Modulo – n – counter
- Test & Measurement
- Frequency division
- Common Clocks
- Data Synchronizers
- Frequency Dividers
- Frequency Divider circuits
- Memory
- EMI reduction circuitry
