SN74AUP1G79DCKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Base Part Number | 74AUP1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Circuits | 1 |
| Load Capacitance | 30pF |
| Output Current | 4mA |
| Number of Bits | 1 |
| Clock Frequency | 266MHz |
| Propagation Delay | 17.3 ns |
| Turn On Delay Time | 3 ns |
| Family | AUP/ULP/V |
| Current - Quiescent (Iq) | 500nA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 5.8ns @ 3.3V, 30pF |
| Prop. Delay@Nom-Sup | 24 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.5pF |
| Power Supply Current-Max (ICC) | 0.0009mA |
| fmax-Min | 260 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 220000000Hz |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUP1G79DCKT Overview
The flip flop is packaged in a case of 5-TSSOP, SC-70-5, SOT-353. There is an embedded version in the package Tape & Reel (TR). It is configured with Non-Invertedas an output. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates with an input voltage of 0.8V~3.6V volts. -40°C~85°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. The 74AUPseries comprises this type of FPGA. There should be no greater frequency than 266MHzon its output. This process consumes 500nA quiescents. There are 5 terminations,D latch belongs to the 74AUP1G79 family. Power is provided by a 1.2V supply. The input capacitance of this JK flip flopis 1.5pF farads. A device of this type belongs to the family of AUP/ULP/V. This electronic part is mounted in the way of Surface Mount. 5pins are included in its design. This device has Positive Edgeas its clock edge trigger type. It is included in FF/Latches. An electronic part designed with 1bits is used in this application. 3.6Vis the maximum supply voltage (Vsup). Keeping the supply voltage (Vsup) above 0.8V is necessary for normal operation. Using 1 circuits, it is highly flexible. On the basis of its reliable performance, this D flip flop is well suited for use with TR. Featuring the maximum design flexibility, it has an output current of 4mA .
SN74AUP1G79DCKT Features
Tape & Reel (TR) package
74AUP series
5 pins
1 Bits
SN74AUP1G79DCKT Applications
There are a lot of Texas Instruments SN74AUP1G79DCKT Flip Flops applications.
- Storage Registers
- Registers
- Bounce elimination switch
- Frequency Divider circuits
- Individual Asynchronous Resets
- Supports Live Insertion
- 2 – Bit synchronous counter
- Storage registers
- Counters
- Common Clocks
