SN74AUP1G79DCKTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SC |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 5 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Frequency | 280MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Load Capacitance | 30pF |
| Propagation Delay | 17.3 ns |
| Turn On Delay Time | 3 ns |
| Family | AUP/ULP/V |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | D FLIP-FLOP |
| Number of Bits per Element | 1 |
| Prop. Delay@Nom-Sup | 24 ns |
| High Level Output Current | -4mA |
| Low Level Output Current | 4mA |
| fmax-Min | 260 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AUP1G79DCKTG4 Overview
The item is packaged in SCcases. It is included in the package Tape & Reel (TR). 5terminations have occurred. The D flip flop is powered by a voltage of 1.2V . It is a member of the AUP/ULP/Vfamily of D flip flop. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 5. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. As a result of its reliability, this D flip flop is ideally suited for TR. A -4mAis set for the high level output current. In the low level output current setting, the current is set to 4mA. Temperatures below 85°Care ideal for operating. It is recommended that the operating temperature is higher than -40°C. The minimal supply voltage is 800mV. It is capable of supporting a maximum supply voltage of 3.6V. This frequency can be achieved 280MHz. There is a logic IC D FLIP-FLOP used in the D flip flop. Currently, it is equipped with 1 functions . It is equipped with 5 pins.
SN74AUP1G79DCKTG4 Features
Tape & Reel (TR) package
5 pins
1 Functions
5 pin count
SN74AUP1G79DCKTG4 Applications
There are a lot of Texas Instruments SN74AUP1G79DCKTG4 Flip Flops applications.
- Registers
- Counters
- Divide a clock signal by 2 or 4
- Synchronous counter
- Circuit Design
- Safety Clamp
- QML qualified product
- 2 – Bit synchronous counter
- Frequency Divider circuits
- Single Up Count-Control Line
