SN74AUP2G79DCUR
| Parameters | |
|---|---|
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Circuits | 2 |
| Load Capacitance | 30pF |
| Output Current | 4mA |
| Clock Frequency | 266MHz |
| Propagation Delay | 24 ns |
| Quiescent Current | 500nA |
| Turn On Delay Time | 3 ns |
| Family | AUP/ULP/V |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 6.3ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.5pF |
| Power Supply Current-Max (ICC) | 0.0009mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74AUP2G79 |
| Function | Standard |
SN74AUP2G79DCUR Overview
It is packaged in the way of 8-VFSOP (0.091, 2.30mm Width). As part of the package Tape & Reel (TR), it is embedded. This output is configured with Non-Inverted. The trigger it is configured with uses Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 0.8V~3.6V volts, it operates. In the operating environment, the temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. JK flip flop belongs to the 74AUPseries of FPGAs. A frequency of 266MHzshould not be exceeded by its output. Terminations are 8. This D latch belongs to the family of 74AUP2G79. The power source is powered by 1.2V. JK flip flop input capacitance is 1.5pF farads. This D flip flop belongs to the family of AUP/ULP/V. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 8. The clock edge trigger type for this device is Positive Edge. This device is part of the FF/Latchesbase part number family. The maximal supply voltage (Vsup) reaches 3.6V. Its superior flexibility is attributed to its use of 2 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. With a current output of 4mA , it offers maximum design flexibility. As a result, it consumes 500nA of quiescent current without being affected by external factors.
SN74AUP2G79DCUR Features
Tape & Reel (TR) package
74AUP series
8 pins
SN74AUP2G79DCUR Applications
There are a lot of Texas Instruments SN74AUP2G79DCUR Flip Flops applications.
- Control circuits
- Computing
- CMOS Process
- Circuit Design
- Computers
- Bounce elimination switch
- Registers
- ESD protection
- Buffer registers
- Bus hold
