SN74BCT29825NT
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Weight | 1.753503g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74BCT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE; WITH TRIPLE OUTPUT ENABLE |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74BCT29825 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Output Current | 48mA |
| Clock Frequency | 125MHz |
| Propagation Delay | 7.8 ns |
| Turn On Delay Time | 5.4 ns |
| Family | BCT/FBT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 16mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 48mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 7.8ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 40mA |
| Number of Input Lines | 5 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74BCT29825NT Overview
The item is packaged in 24-DIP (0.300, 7.62mm)cases. The Tubepackage contains it. T flip flop uses Tri-State, Non-Invertedas its output configuration. JK flip flop uses Positive Edgeas the trigger. There is an electric part mounted in the way of Through Hole. The JK flip flop operates at a voltage of 4.5V~5.5V. A temperature of 0°C~70°C TAis used in the operation. This logic flip flop is classified as type D-Type. The 74BCTseries comprises this type of FPGA. You should not exceed 125MHzin its output frequency. In total, it contains 1 elements. It consumes 16mA of quiescent Currently, there are 24 terminations. The 74BCT29825 family contains it. Power is provided by a 5V supply. Input capacitance of this device is 5pF farads. Devices in the BCT/FBTfamily are electronic devices. It is mounted by the way of Through Hole. 24pins are included in its design. The clock edge trigger type for this device is Positive Edge. This device is part of the FF/Latchesbase part number family. There are 5V power supplies attached to it. The flip flop contains 2ports. In order to achieve high efficiency, the supply voltage should be maintained at 5V. Featuring the maximum design flexibility, it has an output current of 48mA . It has 5lines. Additionally, there are WITH CLEAR AND CLOCK ENABLE; WITH TRIPLE OUTPUT ENABLE on the electronic flip flop that can be referred to.
SN74BCT29825NT Features
Tube package
74BCT series
24 pins
5V power supplies
SN74BCT29825NT Applications
There are a lot of Texas Instruments SN74BCT29825NT Flip Flops applications.
- 2 – Bit synchronous counter
- Memory
- Consumer
- Dynamic threshold performance
- Buffered Clock
- Cold spare funcion
- Test & Measurement
- Frequency Dividers
- Single Up Count-Control Line
- Guaranteed simultaneous switching noise level
