SN74BCT29843DWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74BCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Additional Feature | WITH CLEAR AND PRESET |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74BCT29843 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 9:9 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 9 |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 6 ns |
| Family | BCT/FBT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 48mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.048 A |
| Power Supply Current-Max (ICC) | 35mA |
| Number of Input Lines | 9 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74BCT29843DWG4 Overview
The package in which it is embedded is named 24-SOIC (0.295, 7.50mm Width). It is packaged in the way of Tube. It uses Tri-State as the output. This electrical device has Logic type D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. With a supply voltage of 4.5V~5.5V, it operates. A temperature of 0°C~70°C is set as the operating temperature. The 74BCT series is associated with this FPGA. The design of this electronic part contains 9 bits. In this device, there are 24 terminations that have been designed. The family it belongs to is 74BCT29843. With a supply voltage of 5V, it operates. 24 pins are provided. This electronic device belongs to the family of BCT/FBT. With the design of the board, there are only 24 pins. Surface Mount is the method used for mounting this electronic part. In this device, there are 2 ports. There is a subcategory of FF/Latches for this part. 5.5V is the maximum supply voltage (Vsup). The system is powered by 5V sources. A voltage greater than 4.5V must be supplied as a power supply (Vsup). There are 9 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. There are also characteristics of WITH CLEAR AND PRESET associated with it. Its maximum current supply (ICC) reaches 35mA.
SN74BCT29843DWG4 Features
24-SOIC (0.295, 7.50mm Width) package
74BCT series
9 Bits
74BCT29843 family
24 pin count
24 pins
5V power supplies
SN74BCT29843DWG4 Applications
There are a lot of Texas Instruments SN74BCT29843DWG4 Latches applications.
- Hammer Device Information
- Sample and hold register
- A/D converters
- Four-bit storage with output enable
- Relay
- Automotive Cluster
- Automotive Body Electronics
- Shift Registers
- Flip-flops
- Buffer/Storage Registers
