SN74BCT374DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74BCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74BCT374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 70MHz |
| Propagation Delay | 9.1 ns |
| Turn On Delay Time | 7.2 ns |
| Family | BCT/FBT |
| Current - Quiescent (Iq) | 5mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 9.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 6pF |
| Power Supply Current-Max (ICC) | 60mA |
| Number of Input Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74BCT374DBR Overview
16-SSOP (0.209, 5.30mm Width)is the packaging method. A package named Tape & Reel (TR)includes it. Tri-State, Non-Invertedis the output configured for it. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. It is operating at a temperature of 0°C~70°C TA. This D latch has the type D-Type. JK flip flop is a part of the 74BCTseries of FPGAs. You should not exceed 70MHzin its output frequency. In total, it contains 1 elements. Despite external influences, it consumes 5mAof quiescent current. The number of terminations is 20. It is a member of the 74BCT374 family. The D flip flop is powered by a voltage of 5V . This T flip flop has a capacitance of 6pF farads at the input. Devices in the BCT/FBTfamily are electronic devices. The electronic part is mounted in the way of Surface Mount. This board has 20 pins. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. An electronic part with 8bits has been designed. This D flip flop is well suited for TR based on its reliable performance. A power supply of 5Vis required to operate it. The flip flop contains 2ports. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. This input has 8lines in it.
SN74BCT374DBR Features
Tape & Reel (TR) package
74BCT series
20 pins
8 Bits
5V power supplies
SN74BCT374DBR Applications
There are a lot of Texas Instruments SN74BCT374DBR Flip Flops applications.
- Automotive
- Power down protection
- Latch-up performance
- Shift Registers
- Matched Rise and Fall
- Buffered Clock
- ESCC
- Balanced 24 mA output drivers
- Balanced Propagation Delays
- Storage Registers
