SN74F109D
| Parameters | |
|---|---|
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 90000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74F109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 20mA |
| Clock Frequency | 150MHz |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 3 ns |
| Family | F/FAST |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Quiescent (Iq) | 17mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Schmitt Trigger | No |
| fmax-Min | 90 MHz |
SN74F109D Overview
It is packaged in the way of 16-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tube. In the configuration, Differentialis used as the output. This trigger is configured to use Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. The operating temperature is 0°C~70°C TA. It is an electronic flip flop with the type JK Type. In FPGA terms, D flip flop is a type of 74Fseries FPGA. Its output frequency should not exceed 150MHz. T flip flop consumes 17mA quiescent energy. A total of 16 terminations have been made. If you search by 74F109, you will find similar parts. A voltage of 5V provides power to the D latch. The electronic device belongs to the F/FASTfamily. Surface Mount mounts this electronic component. This board has 16 pins. This device has the clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. Its flexibility is enhanced by 2 circuits. The system runs on a power supply of 5V watts. For high efficiency, the supply voltage should be kept at 5V. With an output current of 20mA, this device offers maximum design flexibility.
SN74F109D Features
Tube package
74F series
16 pins
5V power supplies
SN74F109D Applications
There are a lot of Texas Instruments SN74F109D Flip Flops applications.
- Patented noise
- Balanced 24 mA output drivers
- Automotive
- High Performance Logic for test systems
- Frequency Dividers
- Registers
- Memory
- ATE
- Convert a momentary switch to a toggle switch
- Computers
