SN74F112NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74F112 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 20mA |
| Clock Frequency | 130MHz |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 4.6 ns |
| Family | F/FAST |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Quiescent (Iq) | 19mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 6.5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 7.5 ns |
| Trigger Type | Negative Edge |
| Schmitt Trigger | No |
| Clock Edge Trigger Type | Negative Edge |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74F112NSR Overview
In the form of 16-SOIC (0.209, 5.30mm Width), it has been packaged. The Tape & Reel (TR)package contains it. There is a Differentialoutput configured with it. This trigger uses the value Negative Edge. Surface Mountis in the way of this electric part. The supply voltage is set to 4.5V~5.5V. It is operating at 0°C~70°C TA. It belongs to the type JK Typeof flip flops. This type of FPGA is a part of the 74F series. You should not exceed 130MHzin its output frequency. As a result, it consumes 19mA quiescent current and is not affected by external forces. 16terminations have occurred. It is a member of the 74F112 family. It is powered by a voltage of 5V . In this case, the D flip flop belongs to the F/FASTfamily. There is an electronic part that is mounted in the way of Surface Mount. This board is designed with 16pins on it. It has a clock edge trigger type of Negative Edge. It is included in FF/Latches. The superior flexibility of this circuit is achieved by using 2 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TR. In order for the device to operate, it requires 5V power supplies. In order to achieve high efficiency, the supply voltage should be maintained at 5V. With an output current of 20mA, it is possible to design the device in any way you want.
SN74F112NSR Features
Tape & Reel (TR) package
74F series
16 pins
5V power supplies
SN74F112NSR Applications
There are a lot of Texas Instruments SN74F112NSR Flip Flops applications.
- QML qualified product
- Consumer
- CMOS Process
- Memory
- Cold spare funcion
- Storage Registers
- Single Down Count-Control Line
- Guaranteed simultaneous switching noise level
- ESD protection
- Latch
