SN74F175N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74F175 |
| Function | Master Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Output Current | 20mA |
| Number of Bits | 1 |
| Clock Frequency | 140MHz |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 3.2 ns |
| Family | F/FAST |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 34mA |
| Current - Output High, Low | 1mA 20mA |
| Max I(ol) | 0.02 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74F175N Overview
The flip flop is packaged in a case of 16-DIP (0.300, 7.62mm). You can find it in the Tubepackage. T flip flop is configured with an output of Differential. Positive Edgeis the trigger it is configured with. It is mounted in the way of Through Hole. The JK flip flop operates at 4.5V~5.5Vvolts. Currently, the operating temperature is 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74F series. It should not exceed 140MHzin terms of its output frequency. A total of 1elements are contained within it. It consumes 34mA of quiescent current without being affected by external factors. There have been 16 terminations. You can search similar parts based on 74F175. The D flip flop is powered by a voltage of 5V . In terms of electronic devices, this device belongs to the F/FASTfamily of devices. This electronic part is mounted in the way of Through Hole. A total of 16pins are provided on this board. It has a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. There are 1bits in this flip flop. The superior flexibility is achieved through the use of 4 circuits. A total of 5V power supplies are needed to run it. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. The output current of 20mA makes it feature maximum design flexibility.
SN74F175N Features
Tube package
74F series
16 pins
1 Bits
5V power supplies
SN74F175N Applications
There are a lot of Texas Instruments SN74F175N Flip Flops applications.
- Set-reset capability
- Dynamic threshold performance
- Buffer registers
- Pattern generators
- Control circuits
- Parallel data storage
- Asynchronous counter
- Balanced Propagation Delays
- Data storage
- Convert a momentary switch to a toggle switch
