SN74F373DBRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FF/Latches |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 8.6 ns |
| Family | F/FAST |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.024 A |
| High Level Output Current | -3mA |
| Low Level Output Current | 24mA |
| Power Supply Current-Max (ICC) | 55mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74F373DBRG4 Overview
A package called SSOP contains it. It is packaged in the way of Tape and Reel. 8 Bits are used in the design of this electronic part. As far as this device is concerned, it has no terminations. The device works with a voltage of 5V for its supply voltage. It has 20 pins that makes it easy to use. In terms of electronic devices, this one is in the F/FAST family. The pin configuration of the device is 20. It is mounted according to the Surface Mount method. This device has a total of 2 ports. The part is in the FF/Latches subcategory. 5V power supplies are needed to operate it. A high efficiency supply voltage should be maintained at 5V. The circuit's superior flexibility is achieved through the use of 8 circuits. As its maximal power current (ICC) reaches 55mA, it is able to operate. There is 24mA low level output current set. In the high level output current, the value is set to -3mA. Ideally, the temperature should not be higher than 70°C. Temperatures above 0°C should be used. The maximum supply voltage is 5.5V. The minimal voltage for operation is 4.5V. As far as the logic IC is concerned, it uses BUS DRIVER. Its 24mA output current allows for maximum design flexibility.
SN74F373DBRG4 Features
SSOP package
8 Bits
20 pin count
20 pins
5V power supplies
SN74F373DBRG4 Applications
There are a lot of Texas Instruments SN74F373DBRG4 Latches applications.
- Counters
- Digital bus buffer
- Parallel data storage
- Pattern Generators
- Parallel Output
- Display
- TV Set-top Boxes
- Relay
- Pattern generators
- PCs and Notebooks
