SN74F374N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | DIP |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74F374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 100MHz |
| Propagation Delay | 6.1 ns |
| Turn On Delay Time | 3.2 ns |
| Family | F/FAST |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 3mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74F374N Overview
20-DIP (0.300, 7.62mm)is the way it is packaged. D flip flop is embedded in the Tube package. This output is configured with Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Through Holemounts this electrical part. The JK flip flop operates at 4.5V~5.5Vvolts. 0°C~70°C TAis the operating temperature. It belongs to the type D-Typeof flip flops. FPGAs belonging to the 74Fseries contain this type of chip. You should not exceed 100MHzin its output frequency. There are 1 elements in it. There are 20 terminations,The 74F374family includes it. It is powered from a supply voltage of 5V. In terms of electronic devices, this device belongs to the F/FASTfamily of devices. It is mounted in the way of Through Hole. A total of 20pins are provided on this board. This device's clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. An electronic part designed with 8bits is used in this application. In order for the device to operate, it requires 5V power supplies. The D flip flop has no ports embedded. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. It is designed with 3 output lines. It is reported that there are 8 channels.
SN74F374N Features
Tube package
74F series
20 pins
8 Bits
5V power supplies
SN74F374N Applications
There are a lot of Texas Instruments SN74F374N Flip Flops applications.
- Storage Registers
- Data Synchronizers
- Balanced 24 mA output drivers
- Data transfer
- Functionally equivalent to the MC10/100EL29
- Frequency Dividers
- Convert a momentary switch to a toggle switch
- Bounce elimination switch
- Pattern generators
- Differential Individual
