SN74HC109NSRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DUMMY VAL |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC109 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 60MHz |
| Propagation Delay | 175 ns |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 58 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC109NSRE4 Overview
The package is in the form of 16-SOIC (0.209, 5.30mm Width). There is an embedded version in the package Tape & Reel (TR). Currently, the output is configured to use Differential. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 2V~6Vis required for its operation. In the operating environment, the temperature is -40°C~85°C TA. It is an electronic flip flop with the type JK Type. In this case, it is a type of FPGA belonging to the 74HC series. In order for it to function properly, its output frequency should not exceed 60MHz. Despite external influences, it consumes 4μAof quiescent current. The number of terminations is 16. Members of the 74HC109family make up this object. Power is provided by a 5V supply. This T flip flop has a capacitance of 3pF farads at the input. In this case, the D flip flop belongs to the HC/UHfamily. A part of the electronic system is mounted in the way of Surface Mount. The 16pins are designed into the board. In this device, the clock edge trigger type is Positive Edge. This part is included in FF/Latches. The maximal supply voltage (Vsup) reaches 6V. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. The superior flexibility is achieved through the use of 2 circuits. Considering the reliability of this T flip flop, it is well suited for TR. If high efficiency is desired, the supply voltage should be kept at 5V. With an output current of 5.2mA, it is possible to design the device in any way you want. The JK flip flop is with 3 output lines to operate. DUMMY VALis also one of its characteristics.
SN74HC109NSRE4 Features
Tape & Reel (TR) package
74HC series
16 pins
SN74HC109NSRE4 Applications
There are a lot of Texas Instruments SN74HC109NSRE4 Flip Flops applications.
- Frequency Divider circuits
- Divide a clock signal by 2 or 4
- ESD protection
- Data Synchronizers
- Reduced system switching noise
- Guaranteed simultaneous switching noise level
- Cold spare funcion
- Functionally equivalent to the MC10/100EL29
- Memory
- Power down protection
