SN74HC139DG4
| Parameters | |
|---|---|
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 220 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 220 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Logic IC Type | OTHER DECODER/DRIVER |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Decoder/Drivers |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 16 |
SN74HC139DG4 Overview
Providing this information in the SOIC enables digital switch board space to be saved.Its basic configuration includes terminations in the 16 range.The multiplexer's system works with 5V voltage.Currently, this turn signal switch has a total of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.This multiplexer ic is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is included into the family of HC/UH.This is an the digital switch ic that is classified as Decoder/Drivers.It consumes 80μA current of multiplexer ic without external influences.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.In accordance with TUBE, switches can be packaged.The signal source consists of 4 output lines.There is no problem with operating this signal switch at the maximum temperature of 85°C.Temperatures of the multiplexer should be kept at -40°C.Based on the device specifications, the signal switches is designed to operate at 6V maximum supply voltage.Typical device specifications specify a voltage supply of 2V for the digital swith.The mux switch configuration consists of 2 elements.In order to implement its logic, it makes use of IC OTHER DECODER/DRIVER.
SN74HC139DG4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Operating with the supply voltage of 5V
4 output lines
OTHER DECODER/DRIVER as the logic IC
SN74HC139DG4 Applications
There are a lot of Texas Instruments SN74HC139DG4 Signal Switches / Multiplexers / Decoders applications.
- Electronically controlled engine system
- Speed synchronization of multiple motors in industries
- Telephone network
- Logic circuits
- Enabling block of memory depending on address in memory chips
- Recording transmission
- To select different devices in microprocessor input
- To select different devices in microprocessor output
- Electronics industry
- Combinational circuit
