SN74HC174DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 50MHz |
| Propagation Delay | 160 ns |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 3 |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 25000000Hz |
| Length | 9.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74HC174DT Overview
The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. D flip flop is embedded in the Tape & Reel (TR) package. In the configuration, Non-Invertedis used as the output. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A 2V~6Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. This type of FPGA is a part of the 74HC series. In order for it to function properly, its output frequency should not exceed 50MHz. A total of 1 elements are present. During its operation, it consumes 8μA quiescent energy. Currently, there are 16 terminations. D latch belongs to the 74HC174 family. The D flip flop is powered by a voltage of 5V . Its input capacitance is 3pF farads. An electronic device belonging to the family HC/UHcan be found here. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. This device's clock edge trigger type is Positive Edge. The part is included in FF/Latches. Vsup reaches 6V, the maximal supply voltage. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Its superior flexibility is attributed to its use of 7 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. If high efficiency is desired, the supply voltage should be kept at 5V. As a result of its output current of 5.2mA, it is very flexible in terms of design. As of now, there are 3input lines.
SN74HC174DT Features
Tape & Reel (TR) package
74HC series
16 pins
SN74HC174DT Applications
There are a lot of Texas Instruments SN74HC174DT Flip Flops applications.
- Digital electronics systems
- CMOS Process
- Control circuits
- Instrumentation
- Functionally equivalent to the MC10/100EL29
- Cold spare funcion
- Common Clocks
- ESD performance
- Dynamic threshold performance
- Memory
