SN74HC174NG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74HC174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 50MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| RoHS Status | ROHS3 Compliant |
SN74HC174NG4 Overview
The item is packaged in 16-DIP (0.300, 7.62mm)cases. The Tubepackage contains it. In the configuration, Non-Invertedis used as the output. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 2V~6V volts. -40°C~85°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 50MHz Hz. In total, it contains 1 elements. Despite external influences, it consumes 8μAof quiescent current. It is a member of the 74HC174 family. The input capacitance of this JK flip flopis 3pF farads.
SN74HC174NG4 Features
Tube package
74HC series
SN74HC174NG4 Applications
There are a lot of Texas Instruments SN74HC174NG4 Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Common Clocks
- Buffer registers
- Shift Registers
- Synchronous counter
- Reduced system switching noise
- Frequency Dividers
- Differential Individual
- ESCC
- High Performance Logic for test systems
