SN74HC175NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 4 |
| Clock Frequency | 60MHz |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 26ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 38 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC175NSR Overview
16-SOIC (0.209, 5.30mm Width)is the packaging method. A package named Tape & Reel (TR)includes it. In the configuration, Differentialis used as the output. JK flip flop uses Positive Edgeas the trigger. Surface Mountis positioned in the way of this electronic part. Powered by a 2V~6Vvolt supply, it operates as follows. It is operating at -40°C~85°C TA. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74HC series. In order for it to function properly, its output frequency should not exceed 60MHz. A total of 1elements are present in it. This process consumes 8μA quiescents. There have been 16 terminations. D latch belongs to the 74HC175 family. A voltage of 5V is used as the power supply for this D latch. A JK flip flop with a 3pFfarad input capacitance is used here. It belongs to the family of electronic devices known as HC/UH. It is mounted in the way of Surface Mount. Basically, it is designed with a set of 16 pins. Its clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. It is designed with 4bits. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. A normal operating voltage (Vsup) should remain above 2V. In order to achieve its superior flexibility, 4 circuits are used. As a result of its reliable performance, this T flip flop is suitable for TR. In order to ensure high efficiency, the supply voltage should remain at 5V. With an output current of 5.2mA, this device offers maximum design flexibility. There are 2 output lines in this JK flip flop.
SN74HC175NSR Features
Tape & Reel (TR) package
74HC series
16 pins
4 Bits
SN74HC175NSR Applications
There are a lot of Texas Instruments SN74HC175NSR Flip Flops applications.
- Safety Clamp
- ESD protection
- Divide a clock signal by 2 or 4
- Convert a momentary switch to a toggle switch
- Data Synchronizers
- Functionally equivalent to the MC10/100EL29
- Frequency division
- Balanced 24 mA output drivers
- Reduced system switching noise
- Computers
