SN74HC175PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC175 |
| Function | Master Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 4 |
| Clock Frequency | 60MHz |
| Propagation Delay | 150 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 26ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 38 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC175PW Overview
The flip flop is packaged in a case of 16-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tube. It is configured with Differentialas an output. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. It is operating at a temperature of -40°C~85°C TA. The type of this D latch is D-Type. The 74HCseries comprises this type of FPGA. A frequency of 60MHzshould be the maximum output frequency. In total, it contains 1 elements. There are 16 terminations,If you search by 74HC175, you will find similar parts. The D flip flop is powered by a voltage of 5V . JK flip flop input capacitance is 3pF farads. The electronic device belongs to the HC/UHfamily. Surface Mount mounts this electronic component. A total of 16pins are provided on this board. This device has the clock edge trigger type of Positive Edge. It is included in FF/Latches. There are 4bits in its design. Vsup reaches its maximum value at 6V. The supply voltage (Vsup) should be maintained above 2V for normal operation. In order to achieve its superior flexibility, 4 circuits are used. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. Featuring the maximum design flexibility, it has an output current of 5.2mA . There are 2 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Despite external influences, it consumes 8μAof quiescent current.
SN74HC175PW Features
Tube package
74HC series
16 pins
4 Bits
SN74HC175PW Applications
There are a lot of Texas Instruments SN74HC175PW Flip Flops applications.
- Counters
- Buffer registers
- Automotive
- Functionally equivalent to the MC10/100EL29
- Buffered Clock
- Latch
- Parallel data storage
- Dynamic threshold performance
- Single Up Count-Control Line
- ESD protection
