SN74HC273NS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DUMMY VAL |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC273 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Clock Frequency | 60MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 200 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Propagation Delay (tpd) | 200 ns |
| fmax-Min | 25 MHz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC273NS Overview
As a result, it is packaged as 20-SOIC (0.209, 5.30mm Width). There is an embedded version in the package Tube. T flip flop uses Non-Invertedas its output configuration. The trigger it is configured with uses Positive Edge. Surface Mountmounts this electrical part. With a supply voltage of 2V~6V volts, it operates. Temperature is set to -40°C~85°C TA. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74HC series. It should not exceed 60MHzin terms of its output frequency. In total, there are 1 elements. T flip flop consumes 8μA quiescent energy. The number of terminations is 20. The 74HC273family includes it. The D flip flop is powered by a voltage of 5V . The input capacitance of this JK flip flopis 3pF farads. This D flip flop belongs to the family of HC/UH. It is part of the FF/Latchesbase part number family. As soon as Vsup reaches 6V, the maximum supply voltage is reached. The supply voltage (Vsup) should be kept above 2V for normal operation. Considering the reliability of this T flip flop, it is well suited for TR. A power supply of 2/6Vis required to operate it. High efficiency requires the supply voltage to be maintained at 5V. There is also a characteristic of DUMMY VAL.
SN74HC273NS Features
Tube package
74HC series
2/6V power supplies
SN74HC273NS Applications
There are a lot of Texas Instruments SN74HC273NS Flip Flops applications.
- Memory
- Storage registers
- CMOS Process
- Single Up Count-Control Line
- Convert a momentary switch to a toggle switch
- Single Down Count-Control Line
- Bus hold
- Data storage
- Asynchronous counter
- Count Modes
