SN74HC574DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Clock Frequency | 36MHz |
| Propagation Delay | 265 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 24 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max Propagation Delay @ V, Max CL | 46ns @ 6V, 150pF |
| Prop. Delay@Nom-Sup | 0.066 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 24000000Hz |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC574DW Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. The package Tubecontains it. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at a voltage of 2V~6V. A temperature of -40°C~85°C TAis considered to be the operating temperature. This D latch has the type D-Type. In this case, it is a type of FPGA belonging to the 74HC series. A frequency of 36MHzshould be the maximum output frequency. There are 1 elements in it. The number of terminations is 20. This D latch belongs to the family of 74HC574. The D flip flop is powered by a voltage of 5V . There is 3pF input capacitance for this T flip flop. An electronic device belonging to the family HC/UHcan be found here. A part of the electronic system is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device has Positive Edgeas its clock edge trigger type. It is part of the FF/Latchesbase part number family. There are 8bits in this flip flop. As soon as Vsup reaches 6V, the maximum supply voltage is reached. The supply voltage (Vsup) should be maintained above 2V for normal operation. An electrical current of 2/6V volts is applied to it. The D flip flop is embedded with 2ports. Optimal efficiency requires a supply voltage of 5V. With a current output of 7.8mA , it offers maximum design flexibility. Currently, there are 3 lines of input. There is a consumption of 8μAof quiescent current from it. A total of 8 channels are available.
SN74HC574DW Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
SN74HC574DW Applications
There are a lot of Texas Instruments SN74HC574DW Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Power down protection
- Matched Rise and Fall
- Reduced system switching noise
- Set-reset capability
- Frequency division
- Asynchronous counter
- ESD performance
- Modulo – n – counter
- ATE
