SN74HC74DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 60MHz |
| Propagation Delay | 175 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC74DG4 Overview
In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. Package Tubeembeds it. In the configuration, Differentialis used as the output. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at a voltage of 2V~6V. It is operating at -40°C~85°C TA. A flip flop of this type is classified as a D-Type. JK flip flop belongs to the 74HCseries of FPGAs. Its output frequency should not exceed 60MHz Hz. As a result, it consumes 4μA quiescent current. The number of terminations is 14. The 74HC74 family contains this object. The power source is powered by 5V. Input capacitance of this device is 3pF farads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. It is mounted in the way of Surface Mount. A total of 14pins are provided on this board. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. As soon as 6Vis reached, Vsup reaches its maximum value. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. Due to its superior flexibility, it uses 2 circuits. In order to achieve high efficiency, the supply voltage should be maintained at 5V. Its output current of 5.2mAallows for maximum design flexibility. 4input lines are available for you to choose from.
SN74HC74DG4 Features
Tube package
74HC series
14 pins
SN74HC74DG4 Applications
There are a lot of Texas Instruments SN74HC74DG4 Flip Flops applications.
- Counters
- Frequency division
- Supports Live Insertion
- Parallel data storage
- Storage registers
- Buffer registers
- Control circuits
- Computing
- Reduced system switching noise
- Consumer
