SN74HC74DRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 60MHz |
| Propagation Delay | 175 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC74DRE4 Overview
The flip flop is packaged in 14-SOIC (0.154, 3.90mm Width). The Tape & Reel (TR)package contains it. This output is configured with Differential. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. It is operating at a temperature of -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. JK flip flop belongs to the 74HCseries of FPGAs. There should be no greater frequency than 60MHzon its output. T flip flop consumes 4μA quiescent energy. 14terminations have occurred. You can search similar parts based on 74HC74. It is powered from a supply voltage of 5V. A JK flip flop with a 3pFfarad input capacitance is used here. In this case, the D flip flop belongs to the HC/UHfamily. It is mounted by the way of Surface Mount. The 14pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. The RS flip flops belongs to FF/Latches base part number. Vsup reaches its maximum value at 6V. For normal operation, the supply voltage (Vsup) should be kept above 2V. The superior flexibility is achieved through the use of 2 circuits. In light of its reliable performance, this T flip flop is well suited for TR. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. With an output current of 5.2mA, this device offers maximum design flexibility. There are 4 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
SN74HC74DRE4 Features
Tape & Reel (TR) package
74HC series
14 pins
SN74HC74DRE4 Applications
There are a lot of Texas Instruments SN74HC74DRE4 Flip Flops applications.
- Digital electronics systems
- Guaranteed simultaneous switching noise level
- Instrumentation
- Shift registers
- Control circuits
- ATE
- Data transfer
- Clock pulse
- Registers
- Dynamic threshold performance
