SN74HC74DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 60MHz |
| Propagation Delay | 175 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC74DRG4 Overview
14-SOIC (0.154, 3.90mm Width)is the packaging method. Package Tape & Reel (TR)embeds it. T flip flop uses Differentialas its output configuration. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. A temperature of -40°C~85°C TAis used in the operation. It is an electronic flip flop with the type D-Type. It belongs to the 74HCseries of FPGAs. Its output frequency should not exceed 60MHz. During its operation, it consumes 4μA quiescent energy. There are 14 terminations,You can search similar parts based on 74HC74. It is powered from a supply voltage of 5V. This JK flip flop has a 3pFfarad input capacitance. Electronic devices of this type belong to the HC/UHfamily. Electronic part Surface Mountis mounted in the way. A total of 14pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. This device has the base part number FF/Latches. It reaches 6Vwhen the supply voltage is maximal (Vsup). Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Its flexibility is enhanced by 2 circuits. In light of its reliable performance, this T flip flop is well suited for TR. For high efficiency, the supply voltage should be kept at 5V. With a current output of 5.2mA , it offers maximum design flexibility. 4input lines are available for you to choose from.
SN74HC74DRG4 Features
Tape & Reel (TR) package
74HC series
14 pins
SN74HC74DRG4 Applications
There are a lot of Texas Instruments SN74HC74DRG4 Flip Flops applications.
- Individual Asynchronous Resets
- Buffered Clock
- Count Modes
- Matched Rise and Fall
- Automotive
- Dynamic threshold performance
- Data Synchronizers
- Data storage
- ATE
- Instrumentation
