SN74HC74NSRG4
| Parameters | |
|---|---|
| Frequency | 60MHz |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Propagation Delay | 175 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Number of Bits per Element | 1 |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
SN74HC74NSRG4 Overview
SOPis the way it is packaged. As part of the package Tape & Reel (TR), it is embedded. In total, it contains 2 elements. Currently, there are 14 terminations. Power is provided by a 5V supply. HC/UHis the family of this D flip flop. There is an electronic part mounted in the way of Surface Mount. The 14pins are designed into the board. Its clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. 4input lines are available for you to choose from. -5.2mAis set as the high level output current. It is set to 5.2mAfor the low level output current. A temperature below 85°Cshould be used for operation. The operating temperature should be higher than -40°C. Despite its minimal supply voltage of 2V, it is capable of operating. It is capable of supporting a maximum supply voltage of 6V. We are able to achieve a frequency of 60MHz. It adopts a logic IC of type D FLIP-FLOP. There are 2 functions associated with the JK flip flop. It is equipped with 14 pin count. It features maximum design flexibility due to the 5.2mA output current.
SN74HC74NSRG4 Features
Tape & Reel (TR) package
14 pins
2 Functions
14 pin count
SN74HC74NSRG4 Applications
There are a lot of Texas Instruments SN74HC74NSRG4 Flip Flops applications.
- Frequency division
- Single Down Count-Control Line
- Individual Asynchronous Resets
- Memory
- Functionally equivalent to the MC10/100EL29
- Communications
- Dynamic threshold performance
- Frequency Dividers
- Convert a momentary switch to a toggle switch
- Load Control
