SN74HC74PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 60MHz |
| Propagation Delay | 175 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC74PW Overview
14-TSSOP (0.173, 4.40mm Width)is the packaging method. The package Tubecontains it. Currently, the output is configured to use Differential. It is configured with the trigger Positive Edge. Surface Mountis in the way of this electric part. With a supply voltage of 2V~6V volts, it operates. In the operating environment, the temperature is -40°C~85°C TA. The type of this D latch is D-Type. FPGAs belonging to the 74HCseries contain this type of chip. It should not exceed 60MHzin terms of its output frequency. There is a consumption of 4μAof quiescent energy. It has been determined that there have been 14 terminations. You can search similar parts based on 74HC74. Power is supplied from a voltage of 5V volts. The input capacitance of this JK flip flopis 3pF farads. An electronic device belonging to the family HC/UHcan be found here. There is an electronic component mounted in the way of Surface Mount. It is designed with 14 pins. A Positive Edgeclock edge trigger is used in this device. There is a FF/Latchesbase part number assigned to the RS flip flops. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. The supply voltage (Vsup) should be kept above 2V for normal operation. For high efficiency, the supply voltage should be set to 5V. It offers maximum design flexibility with its output current of 5.2mA. The number of input lines is 4. A total of 2 channels are available.
SN74HC74PW Features
Tube package
74HC series
14 pins
SN74HC74PW Applications
There are a lot of Texas Instruments SN74HC74PW Flip Flops applications.
- Bounce elimination switch
- Buffer registers
- Counters
- Patented noise
- Data transfer
- Convert a momentary switch to a toggle switch
- Reduced system switching noise
- Differential Individual
- ESCC
- Balanced 24 mA output drivers
