SN74HC74PWRG4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 60MHz |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Propagation Delay | 175 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Number of Bits per Element | 1 |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC74PWRG4 Overview
The flip flop is packaged in a case of TSSOP. In total, it contains 2 elements. Currently, there are 14 terminations. The D flip flop is powered by a voltage of 5V . A device of this type belongs to the family of HC/UH. It is mounted by the way of Surface Mount. 14pins are included in its design. This device has Positive Edgeas its clock edge trigger type. There is a base part number FF/Latchesfor the RS flip flops. This D flip flop is well suited for TR based on its reliable performance. For high efficiency, the supply voltage should be kept at 5V. The number of input lines is 4. High level output current is set to -5.2mA. There is 5.2mA output current at the low level. It is recommended that the operating temperature be below 85°C. In order for the system to operate properly, the temperature should be higher than -40°C. Despite its minimal supply voltage of 2V, it is capable of operating. 6Vis its maximum supply voltage. 60MHzis the maximum frequency that can be achieved. D FLIP-FLOPis used as the logic IC in this D flip flop. There are 2 functions available on the JK flip flop. The D latch is equipped with 14 pins. 5.2mA provides maximum design flexibility due to its output current.
SN74HC74PWRG4 Features
14 pins
2 Functions
14 pin count
SN74HC74PWRG4 Applications
There are a lot of Texas Instruments SN74HC74PWRG4 Flip Flops applications.
- Circuit Design
- Cold spare funcion
- Digital electronics systems
- Test & Measurement
- Consumer
- Frequency Dividers
- Set-reset capability
- Power down protection
- Storage Registers
- Data storage
