SN74HC74QPWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 60MHz |
| Propagation Delay | 175 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 50 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC74QPWRG4Q1 Overview
It is packaged in the way of 14-TSSOP (0.173, 4.40mm Width). The package Tape & Reel (TR)contains it. Differentialis the output configured for it. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 2V~6V volts. In the operating environment, the temperature is -40°C~125°C TA. This D latch has the type D-Type. In this case, it is a type of FPGA belonging to the Automotive, AEC-Q100, 74HC series. A frequency of 60MHzshould be the maximum output frequency. As a result, it consumes 4μA of quiescent current without being affected by external factors. The number of terminations is 14. JK flip flop belongs to 74HC74 family. Power is provided by a 5V supply. There is 3pF input capacitance for this T flip flop. Electronic devices of this type belong to the HC/UHfamily. The electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 14. There is a clock edge trigger type of Positive Edgeon this device. This device is part of the FF/Latchesbase part number family. The maximal supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be above 2V. To achieve this superior flexibility, 2 circuits are used. A reliable performance of this D flip flop makes it well suited for use in TR. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It has 1 output lines to operate.
SN74HC74QPWRG4Q1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74HC series
14 pins
SN74HC74QPWRG4Q1 Applications
There are a lot of Texas Instruments SN74HC74QPWRG4Q1 Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Parallel data storage
- Shift Registers
- Memory
- 2 – Bit synchronous counter
- Asynchronous counter
- Convert a momentary switch to a toggle switch
- Matched Rise and Fall
- Single Up Count-Control Line
- Count Modes
