SN74HCT377DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Number of Bits | 8 |
| Clock Frequency | 37MHz |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 12 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 28ns @ 5.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 3 |
| fmax-Min | 22 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HCT377DW Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. It is included in the package Tube. T flip flop uses Non-Invertedas its output configuration. JK flip flop uses Positive Edgeas the trigger. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. In this case, the operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. It belongs to the 74HCTseries of FPGAs. You should not exceed 37MHzin the output frequency of the device. A total of 1 elements are present. Despite external influences, it consumes 8μAof quiescent current. There are 20 terminations,If you search by 74HCT377, you will find similar parts. It is powered by a voltage of 5V . Its input capacitance is 3pF farads. This D flip flop belongs to the family of HCT. The electronic part is mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device's clock edge trigger type is Positive Edge. The part is included in FF/Latches. 8bits are used in its design. The power supply is 5V. In order to ensure high efficiency, the supply voltage should remain at 5V. The output current of 4mA makes it feature maximum design flexibility. It has 3lines. In addition, WITH HOLD MODEis a characteristic of it. 8 channels are available.
SN74HCT377DW Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
SN74HCT377DW Applications
There are a lot of Texas Instruments SN74HCT377DW Flip Flops applications.
- Balanced 24 mA output drivers
- Shift registers
- ESCC
- Asynchronous counter
- Bounce elimination switch
- Clock pulse
- Data storage
- Single Down Count-Control Line
- Safety Clamp
- Shift Registers
