SN74HCT574PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 40MHz |
| Propagation Delay | 45 ns |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 47ns @ 5.5V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 27000000Hz |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HCT574PWR Overview
20-TSSOP (0.173, 4.40mm Width)is the packaging method. A package named Cut Tape (CT)includes it. There is a Tri-State, Non-Invertedoutput configured with it. In the configuration of the trigger, Positive Edgeis used. The electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. In this case, the operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. This type of FPGA is a part of the 74HCT series. You should not exceed 40MHzin the output frequency of the device. In total, it contains 1 elements. T flip flop consumes 8μA quiescent energy. There have been 20 terminations. It is a member of the 74HCT574 family. It is powered by a voltage of 5V . The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It belongs to the family of electronic devices known as HCT. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device has Positive Edgeas its clock edge trigger type. The part you are looking for is included in FF/Latches. It is designed with a number of bits of 8. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. It operates from 5V power supplies. There are 2 ports embedded in the flip flops. The supply voltage should be maintained at 5V for high efficiency. As of now, there are 3input lines. 8is the number of channels.
SN74HCT574PWR Features
Cut Tape (CT) package
74HCT series
20 pins
8 Bits
5V power supplies
SN74HCT574PWR Applications
There are a lot of Texas Instruments SN74HCT574PWR Flip Flops applications.
- Supports Live Insertion
- Event Detectors
- Latch-up performance
- Storage registers
- Buffer registers
- Buffered Clock
- Functionally equivalent to the MC10/100EL29
- CMOS Process
- Cold spare funcion
- Clock pulse
