SN74HCT74D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Clock Frequency | 46MHz |
| Propagation Delay | 28 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 18ns @ 5.5V, 50pF |
| Prop. Delay@Nom-Sup | 35 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HCT74D Overview
The package is in the form of 14-SOIC (0.154, 3.90mm Width). The package Tubecontains it. As configured, the output uses Differential. Positive Edgeis the trigger it is configured with. Surface Mountmounts this electrical part. A 4.5V~5.5Vsupply voltage is required for it to operate. It is operating at -40°C~85°C TA. The type of this D latch is D-Type. In FPGA terms, D flip flop is a type of 74HCTseries FPGA. A frequency of 46MHzshould be the maximum output frequency. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. D latch belongs to the 74HCT74 family. Power is supplied from a voltage of 5V volts. There is 3pF input capacitance for this T flip flop. Devices in the HCTfamily are electronic devices. In this case, the electronic component is mounted in the way of Surface Mount. A total of 14pins are provided on this board. Its clock edge trigger type is Positive Edge. It is included in FF/Latches. It operates from 5V power supplies. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. Featuring the maximum design flexibility, it has an output current of 4mA . 4input lines are available for you to choose from. It consumes 4μA current. It is of 2 channels.
SN74HCT74D Features
Tube package
74HCT series
14 pins
5V power supplies
SN74HCT74D Applications
There are a lot of Texas Instruments SN74HCT74D Flip Flops applications.
- Common Clocks
- Convert a momentary switch to a toggle switch
- Supports Live Insertion
- Consumer
- Differential Individual
- Frequency Dividers
- Shift Registers
- Counters
- Clock pulse
- Parallel data storage
