SN74HCT74DT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Clock Frequency | 46MHz |
| Propagation Delay | 28 ns |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 25ns @ 5.5V, 50pF |
| Prop. Delay@Nom-Sup | 35 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HCT74DT Overview
14-SOIC (0.154, 3.90mm Width)is the packaging method. The Tape & Reel (TR)package contains it. This output is configured with Differential. It is configured with a trigger that uses Positive Edge. It is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. In the operating environment, the temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. JK flip flop belongs to the 74HCTseries of FPGAs. It should not exceed 46MHzin its output frequency. As a result, it consumes 4μA quiescent current and is not affected by external forces. There are 14 terminations,The object belongs to the 74HCT74 family. A voltage of 5V provides power to the D latch. A JK flip flop with a 3pFfarad input capacitance is used here. In terms of electronic devices, this device belongs to the HCTfamily of devices. It is mounted in the way of Surface Mount. It is designed with 14 pins. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchbase part number family. Its superior flexibility is attributed to its use of 2 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. A power supply of 5Vis required to operate it. In order to achieve high efficiency, the supply voltage should be maintained at 5V. Its output current of 4mAallows for maximum design flexibility. This input has 4lines.
SN74HCT74DT Features
Tape & Reel (TR) package
74HCT series
14 pins
5V power supplies
SN74HCT74DT Applications
There are a lot of Texas Instruments SN74HCT74DT Flip Flops applications.
- Reduced system switching noise
- Matched Rise and Fall
- ATE
- Common Clocks
- Data storage
- Storage registers
- ESD protection
- Count Modes
- Load Control
- Instrumentation
