SN74HCT74PWR
| Parameters | |
|---|---|
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 46MHz |
| Propagation Delay | 44 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 25ns @ 5.5V, 50pF |
| Prop. Delay@Nom-Sup | 35 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
SN74HCT74PWR Overview
In the form of 14-TSSOP (0.173, 4.40mm Width), it has been packaged. Package Cut Tape (CT)embeds it. Currently, the output is configured to use Differential. The trigger it is configured with uses Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 4.5V~5.5Vis used as the supply voltage. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typeis the type of this D latch. It is a type of FPGA belonging to the 74HCT series. It should not exceed 46MHzin its output frequency. There have been 14 terminations. D latch belongs to the 74HCT74 family. The power source is powered by 5V. A 3pFfarad input capacitance is provided by this T flip flop. In terms of electronic devices, this device belongs to the HCTfamily of devices. There is an electronic component mounted in the way of Surface Mount. 14pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latch. The superior flexibility of this product is achieved by using 2 circuits. As a result of its reliable performance, this T flip flop is suitable for TR. An electrical current of 5V volts is applied to it. Optimal efficiency requires a supply voltage of 5V. This input has 4lines. There is 4μA quiescent current consumption by it.
SN74HCT74PWR Features
Cut Tape (CT) package
74HCT series
14 pins
5V power supplies
SN74HCT74PWR Applications
There are a lot of Texas Instruments SN74HCT74PWR Flip Flops applications.
- Latch-up performance
- Balanced Propagation Delays
- Data transfer
- Guaranteed simultaneous switching noise level
- Data storage
- Buffer registers
- Dynamic threshold performance
- Registers
- Memory
- Load Control
