SN74LS107ADR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | JK Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS107 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Output Current | 8mA |
| Clock Frequency | 45MHz |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 15 ns |
| Family | LS |
| Logic Function | Flip-Flop |
| Current - Quiescent (Iq) | 6mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 20ns @ 5V, 15pF |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 6mA |
| Number of Input Lines | 4 |
| fmax-Min | 30 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Max Frequency@Nom-Sup | 30000000Hz |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LS107ADR Overview
14-SOIC (0.154, 3.90mm Width)is the packaging method. You can find it in the Tape & Reel (TR)package. The output it is configured with uses Differential. It is configured with a trigger that uses a value of Negative Edge. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.75V~5.25V volts, it operates. In this case, the operating temperature is 0°C~70°C TA. There is JK Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74LS series. Its output frequency should not exceed 45MHz. There is 6mA quiescent consumption. Terminations are 14. JK flip flop belongs to 74LS107 family. It is powered by a voltage of 5V . It is a member of the LSfamily of D flip flop. Electronic part Surface Mountis mounted in the way. It is designed with 14 pins. Its clock edge trigger type is Negative Edge. It is part of the FF/Latchesbase part number family. 2 circuits are used to achieve its superior flexibility. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. The D latch runs on a voltage of 5V volts. Optimal efficiency requires a supply voltage of 5V. Featuring the maximum design flexibility, it has an output current of 8mA . It is reported that there are 4 input lines.
SN74LS107ADR Features
Tape & Reel (TR) package
74LS series
14 pins
5V power supplies
SN74LS107ADR Applications
There are a lot of Texas Instruments SN74LS107ADR Flip Flops applications.
- Automotive
- Storage Registers
- Patented noise
- Computers
- Matched Rise and Fall
- Single Up Count-Control Line
- Registers
- Convert a momentary switch to a toggle switch
- Frequency division
- Cold spare funcion
