SN74LS109AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | INVERTED K INPUT |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74LS109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Output Current | 8mA |
| Clock Frequency | 33MHz |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 13 ns |
| Family | LS |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 40ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Schmitt Trigger | No |
| Number of Input Lines | 5 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS109AN Overview
16-DIP (0.300, 7.62mm)is the packaging method. You can find it in the Tubepackage. T flip flop uses Differentialas its output configuration. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. A voltage of 4.75V~5.25Vis used as the supply voltage. The operating temperature is 0°C~70°C TA. The type of this D latch is JK Type. FPGAs belonging to the 74LSseries contain this type of chip. This D flip flop should not have a frequency greater than 33MHz. A total of 16terminations have been recorded. It is a member of the 74LS109 family. A voltage of 5V is used as the power supply for this D latch. A device of this type belongs to the family of LS. This electronic part is mounted in the way of Through Hole. It is designed with 16 pins. A Positive Edgeclock edge trigger is used in this device. The part you are looking for is included in FF/Latches. Its flexibility is enhanced by 2 circuits. It runs on 5Vvolts of power. For high efficiency, the supply voltage should be kept at 5V. It offers maximum design flexibility with its output current of 8mA. A total of 5input lines have been provided. As an additional reference, you may refer to electronic flip flop INVERTED K INPUT.
SN74LS109AN Features
Tube package
74LS series
16 pins
5V power supplies
SN74LS109AN Applications
There are a lot of Texas Instruments SN74LS109AN Flip Flops applications.
- Data storage
- Buffer registers
- Power down protection
- Cold spare funcion
- CMOS Process
- Consumer
- Latch-up performance
- Frequency division
- Single Down Count-Control Line
- Shift registers
