SN74LS175DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74LS175 |
| Function | Master Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Output Current | 8mA |
| Number of Bits | 4 |
| Clock Frequency | 40MHz |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 13 ns |
| Family | LS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 18mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Max Propagation Delay @ V, Max CL | 25ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 2 |
| fmax-Min | 30 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 30000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS175DR Overview
The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). Package Tape & Reel (TR)embeds it. T flip flop uses Differentialas its output configuration. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.75V~5.25V. Temperature is set to 0°C~70°C TA. The type of this D latch is D-Type. The 74LSseries comprises this type of FPGA. It should not exceed 40MHzin its output frequency. A total of 1 elements are present. T flip flop consumes 18mA quiescent energy. A total of 16 terminations have been made. The 74LS175 family contains this object. It is powered by a voltage of 5V . The electronic device belongs to the LSfamily. This electronic part is mounted in the way of Surface Mount. This board is designed with 16pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is part of the FF/Latchesbase part number family. There are 4bits in its design. 4 circuits are used to achieve its superior flexibility. In light of its reliable performance, this T flip flop is well suited for TR. It runs on 5Vvolts of power. In order to achieve high efficiency, the supply voltage should be maintained at 5V. Its output current of 8mAallows for maximum design flexibility. In order to operate, the chip has 2 output lines.
SN74LS175DR Features
Tape & Reel (TR) package
74LS series
16 pins
4 Bits
5V power supplies
SN74LS175DR Applications
There are a lot of Texas Instruments SN74LS175DR Flip Flops applications.
- Automotive
- Shift Registers
- Cold spare funcion
- Frequency division
- Safety Clamp
- Storage Registers
- Consumer
- Computing
- Matched Rise and Fall
- Data storage
