SN74LS175N
| Parameters | |
|---|---|
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74LS175 |
| Function | Master Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Output Current | 8mA |
| Number of Bits | 4 |
| Clock Frequency | 40MHz |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 13 ns |
| Family | LS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 18mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Max Propagation Delay @ V, Max CL | 25ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 2 |
| fmax-Min | 30 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 30000000Hz |
| Height | 5.08mm |
SN74LS175N Overview
It is embeded in 16-DIP (0.300, 7.62mm) case. As part of the package Tube, it is embedded. The output it is configured with uses Differential. Positive Edgeis the trigger it is configured with. There is an electrical part that is mounted in the way of Through Hole. It operates with a supply voltage of 4.75V~5.25V. In the operating environment, the temperature is 0°C~70°C TA. This D latch has the type D-Type. FPGAs belonging to the 74LSseries contain this type of chip. It should not exceed 40MHzin its output frequency. D latch consists of 1 elements. There is 18mA quiescent consumption. The number of terminations is 16. The object belongs to the 74LS175 family. It is powered from a supply voltage of 5V. The electronic device belongs to the LSfamily. Electronic part Through Holeis mounted in the way. This board has 16 pins. In this device, the clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. There are 4bits in this flip flop. An electrical current of 5V volts is applied to it. For high efficiency, the supply voltage should be kept at 5V. This T flip flop features a maximum design flexibility due to its output current of 8mA. In order to operate, the chip has 2 output lines. It is of 4 channels.
SN74LS175N Features
Tube package
74LS series
16 pins
4 Bits
5V power supplies
SN74LS175N Applications
There are a lot of Texas Instruments SN74LS175N Flip Flops applications.
- Common Clocks
- ESD protection
- Shift Registers
- CMOS Process
- Divide a clock signal by 2 or 4
- Counters
- Single Up Count-Control Line
- Latch
- Bounce elimination switch
- Frequency division
