SN74LS374DWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74LS374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 45pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 50MHz |
| Propagation Delay | 28 ns |
| Turn On Delay Time | 20 ns |
| Family | LS |
| Logic Function | D-Type, Latch |
| Current - Quiescent (Iq) | 40mA |
| Current - Output High, Low | 2.6mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 28ns @ 5V, 45pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 40mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS374DWRG4 Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. As part of the package Tape & Reel (TR), it is embedded. In the configuration, Tri-State, Non-Invertedis used as the output. This trigger uses the value Positive Edge. Surface Mountmounts this electrical part. A voltage of 4.75V~5.25Vis required for its operation. Currently, the operating temperature is 0°C~70°C TA. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 74LS series. A frequency of 50MHzshould not be exceeded by its output. D latch consists of 1 elements. As a result, it consumes 40mA quiescent current. It has been determined that there have been 20 terminations. If you search by 74LS374, you will find similar parts. A voltage of 5V is used to power it. LSis the family of this D flip flop. There is an electronic component mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device exhibits a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. It is designed with 8bits. Its flexibility is enhanced by 8 circuits. Due to its reliability, this T flip flop is well suited for TR. The D latch operates on 5V volts. There are 2 ports embedded in the flip flops. Optimal efficiency requires a supply voltage of 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
SN74LS374DWRG4 Features
Tape & Reel (TR) package
74LS series
20 pins
8 Bits
5V power supplies
SN74LS374DWRG4 Applications
There are a lot of Texas Instruments SN74LS374DWRG4 Flip Flops applications.
- High Performance Logic for test systems
- Data Synchronizers
- Power down protection
- Test & Measurement
- Pattern generators
- Balanced 24 mA output drivers
- Latch-up performance
- Supports Live Insertion
- Safety Clamp
- Memory
