SN74LS377N
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74LS377 |
| Function | Standard |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Nominal Supply Current | 17mA |
| Output Current | 8mA |
| Number of Bits | 8 |
| Clock Frequency | 40MHz |
| Propagation Delay | 27 ns |
| Turn On Delay Time | 17 ns |
| Family | LS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 28mA |
| Current - Output High, Low | 400μA 8mA |
| Max Propagation Delay @ V, Max CL | 27ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
SN74LS377N Overview
It is packaged in the way of 20-DIP (0.300, 7.62mm). It is contained within the Tubepackage. There is a Differentialoutput configured with it. There is a trigger configured with Positive Edge. It is mounted in the way of Through Hole. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. It is operating at 0°C~70°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74LSseries of FPGAs. There should be no greater frequency than 40MHzon its output. There are 1 elements in it. It consumes 28mA of quiescent current without being affected by external factors. Terminations are 20. Members of the 74LS377family make up this object. The power supply voltage is 5V. An electronic device belonging to the family LScan be found here. There is an electronic component mounted in the way of Through Hole. It is designed with 20 pins. This device has Positive Edgeas its clock edge trigger type. There is a base part number FF/Latchesfor the RS flip flops. The flip flop is designed with 8bits. A power supply of 5Vis required to operate it. In order to ensure high efficiency, the supply voltage should remain at 5V. With an output current of 8mA, this device offers maximum design flexibility. It is designed with 2 output lines. 3input lines are available for you to choose from. It is also characterized by WITH HOLD MODE. A total of 8 channels are available.
SN74LS377N Features
Tube package
74LS series
20 pins
8 Bits
5V power supplies
SN74LS377N Applications
There are a lot of Texas Instruments SN74LS377N Flip Flops applications.
- Patented noise
- ESD performance
- ESD protection
- Memory
- Registers
- Memory
- Bounce elimination switch
- Convert a momentary switch to a toggle switch
- Cold spare funcion
- Power down protection
