SN74LS378DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS378 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 7 |
| Output Current | 8mA |
| Clock Frequency | 40MHz |
| Propagation Delay | 27 ns |
| Turn On Delay Time | 17 ns |
| Family | LS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 22mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 27ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 22mA |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS378DR Overview
The flip flop is packaged in a case of 16-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tape & Reel (TR) package. T flip flop uses Non-Invertedas the output. In the configuration of the trigger, Positive Edgeis used. Surface Mountis occupied by this electronic component. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. It is operating at 0°C~70°C TA. D-Typeis the type of this D latch. In this case, it is a type of FPGA belonging to the 74LS series. It should not exceed 40MHzin terms of its output frequency. The list contains 1 elements. It consumes 22mA of quiescent current without being affected by external factors. It has been determined that there have been 16 terminations. This D latch belongs to the family of 74LS378. Power is provided by a 5V supply. This D flip flop belongs to the family of LS. The electronic part is mounted in the way of Surface Mount. This board has 16 pins. This device's clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. Using 7 circuits, it is highly flexible. In view of its reliability, this D flip flop is a good fit for TR. An electrical current of 5V volts is applied to it. Optimal efficiency requires a supply voltage of 5V. The 8mA output current allows it to be designed with the greatest amount of flexibility. A total of 3input lines have been provided. As an additional reference, you may refer to electronic flip flop WITH HOLD MODE.
SN74LS378DR Features
Tape & Reel (TR) package
74LS series
16 pins
5V power supplies
SN74LS378DR Applications
There are a lot of Texas Instruments SN74LS378DR Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Bus hold
- Asynchronous counter
- Memory
- CMOS Process
- Patented noise
- Supports Live Insertion
- ESD protection
- Dynamic threshold performance
- EMI reduction circuitry
