SN74LS73AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74LS73 |
| Function | Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Output Current | 8mA |
| Clock Frequency | 45MHz |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 15 ns |
| Family | LS |
| Logic Function | Flip-Flop |
| Current - Quiescent (Iq) | 6mA |
| Output Characteristics | TOTEM POLE |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 20ns @ 5V, 15pF |
| Trigger Type | Negative Edge |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 6mA |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Negative Edge |
| Min Supply Voltage (DC) | 4.75V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS73AD Overview
The package is in the form of 14-SOIC (0.154, 3.90mm Width). The package Tubecontains it. Differentialis the output configured for it. It is configured with a trigger that uses a value of Negative Edge. It is mounted in the way of Surface Mount. The supply voltage is set to 4.75V~5.25V. Currently, the operating temperature is 0°C~70°C TA. The type of this D latch is JK Type. FPGAs belonging to the 74LSseries contain this type of chip. Its output frequency should not exceed 45MHz. As a result, it consumes 6mA of quiescent current without being affected by external factors. A total of 14 terminations have been made. It is a member of the 74LS73 family. The power supply voltage is 5V. Electronic devices of this type belong to the LSfamily. In this case, the electronic component is mounted in the way of Surface Mount. A total of 14pins are provided on this board. It has a clock edge trigger type of Negative Edge. This device is part of the FF/Latchesbase part number family. The D latch operates on 5V volts. High efficiency requires the supply voltage to be maintained at 5V. The output current of 8mA makes it feature maximum design flexibility. The number of input lines is 3. The number of channels is growing strong/weak: 2.
SN74LS73AD Features
Tube package
74LS series
14 pins
5V power supplies
SN74LS73AD Applications
There are a lot of Texas Instruments SN74LS73AD Flip Flops applications.
- ESD protection
- Individual Asynchronous Resets
- Single Up Count-Control Line
- Safety Clamp
- Computing
- Power down protection
- Latch
- Data storage
- Latch-up performance
- Set-reset capability
