SN74LS73ADRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS73 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Output Current | 8mA |
| Clock Frequency | 45MHz |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 15 ns |
| Family | LS |
| Current - Quiescent (Iq) | 6mA |
| Output Characteristics | TOTEM POLE |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 20ns @ 5V, 15pF |
| Trigger Type | Negative Edge |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 6mA |
| fmax-Min | 30 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Max Frequency@Nom-Sup | 30000000Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS73ADRG4 Overview
It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). As part of the package Tape & Reel (TR), it is embedded. There is a Differentialoutput configured with it. In the configuration of the trigger, Negative Edgeis used. It is mounted in the way of Surface Mount. With a supply voltage of 4.75V~5.25V volts, it operates. A temperature of 0°C~70°C TAis used in the operation. Logic flip flops of this type are classified as JK Type. It belongs to the 74LSseries of FPGAs. There should be no greater frequency than 45MHzon its output. As a result, it consumes 6mA quiescent current and is not affected by external forces. 14terminations have occurred. The object belongs to the 74LS73 family. A voltage of 5V is used to power it. An electronic device belonging to the family LScan be found here. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 14 pins. A Negative Edgeclock edge trigger is used in this device. It is part of the FF/Latchesbase part number family. Using 2 circuits, it is highly flexible. In view of its reliability, this D flip flop is a good fit for TR. A power supply of 5Vis required to operate it. High efficiency requires the supply voltage to be maintained at 5V. This T flip flop features a maximum design flexibility due to its output current of 8mA.
SN74LS73ADRG4 Features
Tape & Reel (TR) package
74LS series
14 pins
5V power supplies
SN74LS73ADRG4 Applications
There are a lot of Texas Instruments SN74LS73ADRG4 Flip Flops applications.
- Frequency division
- Individual Asynchronous Resets
- Latch
- Computers
- Single Down Count-Control Line
- Memory
- Shift registers
- 2 – Bit synchronous counter
- Supports Live Insertion
- Consumer
