SN74LV273AZQNR
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | LIFEBUY (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFBGA |
| Number of Pins | 20 |
| Weight | 21.800783mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 12mA |
| Number of Bits | 8 |
| Clock Frequency | 160MHz |
| Propagation Delay | 22.1 ns |
| Turn On Delay Time | 4.8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 12mA 12mA |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Input Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 45000000Hz |
| Height | 1mm |
| Length | 4mm |
| Width | 3mm |
| Thickness | 750μm |
SN74LV273AZQNR Overview
The package is in the form of 20-VFBGA. D flip flop is included in the Tape & Reel (TR)package. T flip flop uses Non-Invertedas its output configuration. JK flip flop uses Positive Edgeas the trigger. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 2V~5.5V volts, it operates. In the operating environment, the temperature is -40°C~85°C TA. The type of this D latch is D-Type. This type of FPGA is a part of the 74LV series. It should not exceed 160MHzin terms of its output frequency. In total, it contains 1 elements. There is a consumption of 20μAof quiescent energy. There have been 20 terminations. It is a member of the 74LV273 family. It is powered from a supply voltage of 2.5V. This T flip flop has a capacitance of 2pF farads at the input. Electronic devices of this type belong to the LV/LV-A/LVX/Hfamily. This electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device has Positive Edgeas its clock edge trigger type. This part is included in FF/Latches. An electronic part designed with 8bits is used in this application. 5.5Vis the maximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be above 2V. Its superior flexibility is attributed to its use of 8 circuits. As a result of its reliability, this D flip flop is ideally suited for TR. The system runs on a power supply of 3.3V watts. Featuring the maximum design flexibility, it has an output current of 12mA . A total of 2input lines have been provided.
SN74LV273AZQNR Features
Tape & Reel (TR) package
74LV series
20 pins
8 Bits
3.3V power supplies
SN74LV273AZQNR Applications
There are a lot of Texas Instruments SN74LV273AZQNR Flip Flops applications.
- Bounce elimination switch
- Frequency Divider circuits
- Circuit Design
- Automotive
- Convert a momentary switch to a toggle switch
- Digital electronics systems
- Consumer
- ESD performance
- EMI reduction circuitry
- Balanced 24 mA output drivers
