SN74LV374ATPWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 170MHz |
| Propagation Delay | 16.2 ns |
| Turn On Delay Time | 4.9 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.9pF |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 50000000Hz |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV374ATPWRG4Q1 Overview
The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). You can find it in the Tape & Reel (TR)package. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates with an input voltage of 2V~5.5V volts. In the operating environment, the temperature is -40°C~105°C TA. This logic flip flop is classified as type D-Type. The Automotive, AEC-Q100, 74LVseries comprises this type of FPGA. Its output frequency should not exceed 170MHz. A total of 1 elements are present. This process consumes 20μA quiescents. There have been 20 terminations. You can search similar parts based on 74LV374. The power source is powered by 3.3V. The input capacitance of this JK flip flopis 2.9pF farads. Devices in the LV/LV-A/LVX/Hfamily are electronic devices. It is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. Its clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part designed with 8bits is used in this application. Vsup reaches its maximum value at 5.5V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. As a result of its reliability, this D flip flop is ideally suited for TR. The D latch runs on a voltage of 3.3V volts. The D flip flop is embedded with 2ports. This input has 8lines.
SN74LV374ATPWRG4Q1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74LV series
20 pins
8 Bits
3.3V power supplies
SN74LV374ATPWRG4Q1 Applications
There are a lot of Texas Instruments SN74LV374ATPWRG4Q1 Flip Flops applications.
- Power down protection
- Clock pulse
- Frequency division
- Test & Measurement
- Data Synchronizers
- Buffered Clock
- Modulo – n – counter
- Load Control
- CMOS Process
- Parallel data storage
