SN74LV573ATDBRG4
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
SN74LV573ATDBRG4 Overview
A package called 20-SSOP (0.209, 5.30mm Width) contains it. Tape & Reel (TR) is the way in which it is packaged. It is configured with an output of Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. Electronic components are mounted using the Surface Mount method. With a supply voltage of 2V~5.5V, it operates. A temperature of -40°C~85°C is set as the operating temperature. There are a number of FPGAs in this series, including this one. The design of this electronic part contains 8 bits. A device such as this has 20 terminations designed. The family it belongs to is 74LV573. In order to operate it, the supply voltage must be 5V. 20 pins are available on it. This electronic device belongs to the family of LV/LV-A/LVX/H. This board has 20 pins on it, which is what it is designed for. Mounting this electronic component follows the Surface Mount method. In this device, there is a total of 2 ports available for use. The part is in the FF/Latches subcategory. Vsup reaches 5.5V as the maximum supply voltage. There is 5V power supply for it. In order to operate properly, the supply voltage (Vsup) should be greater than 4.5V. Electronic circuits are represented by 8 input lines. On the basis of its reliability, this device is well suited for TAPE AND REEL. With an output current of 16mA, it is highly flexible in terms of design.
SN74LV573ATDBRG4 Features
20-SSOP (0.209, 5.30mm Width) package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
5V power supplies
SN74LV573ATDBRG4 Applications
There are a lot of Texas Instruments SN74LV573ATDBRG4 Latches applications.
- Instrumentation
- Network Switches
- Serial Input
- Serial Output Register
- Clocks
- Parallel-to-Serial Data Conversion
- Multistage ripple counting
- Audio and video switching
- Timers
- Storage
