Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Weight |
60.186038mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Series |
74LV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Type |
D-Type |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.4mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74LV574 |
Function |
Standard |
Qualification Status |
Not Qualified |
Output Type |
Tri-State, Non-Inverted |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
16mA |
Number of Bits |
8 |
Clock Frequency |
175MHz |
Propagation Delay |
19.6 ns |
Turn On Delay Time |
4.8 ns |
Family |
LV/LV-A/LVX/H |
Logic Function |
D-Type, Flip-Flop |
Current - Quiescent (Iq) |
20μA |
Current - Output High, Low |
16mA 16mA |
Max Propagation Delay @ V, Max CL |
5.7ns @ 5V, 50pF |
Trigger Type |
Positive Edge |
Input Capacitance |
1.8pF |
Power Supply Current-Max (ICC) |
0.02mA |
Number of Input Lines |
3 |
Count Direction |
UNIDIRECTIONAL |
Clock Edge Trigger Type |
Positive Edge |
Translation |
N/A |
Max Frequency@Nom-Sup |
45000000Hz |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1.05mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LV574ADGVR Overview
The package is in the form of 20-TFSOP (0.173, 4.40mm Width). The Tape & Reel (TR)package contains it. In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with the trigger Positive Edge. Surface Mountis in the way of this electric part. It operates with a supply voltage of 2V~5.5V. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. In this case, it is a type of FPGA belonging to the 74LV series. Its output frequency should not exceed 175MHz. A total of 1elements are contained within it. As a result, it consumes 20μA of quiescent current without being affected by external factors. Currently, there are 20 terminations. The 74LV574 family contains this object. It is powered from a supply voltage of 2.5V. A JK flip flop with a 1.8pFfarad input capacitance is used here. The electronic device belongs to the LV/LV-A/LVX/Hfamily. It is mounted by the way of Surface Mount. As you can see from the design, it has pins with 20. There is a clock edge trigger type of Positive Edgeon this device. This device is part of the FF/Latchesbase part number family. The flip flop is designed with 8bits. Vsup reaches 5.5V, the maximal supply voltage. For normal operation, the supply voltage (Vsup) should be kept above 2V. Due to its superior flexibility, it uses 8 circuits. In light of its reliable performance, this T flip flop is well suited for TR. A total of 2ports are embedded in the D flip flop. It offers maximum design flexibility with its output current of 16mA. It is reported that there are 3 input lines.
SN74LV574ADGVR Features
Tape & Reel (TR) package
74LV series
20 pins
8 Bits
SN74LV574ADGVR Applications
There are a lot of Texas Instruments SN74LV574ADGVR Flip Flops applications.
- Differential Individual
- Balanced Propagation Delays
- Shift Registers
- Frequency division
- Storage registers
- Single Up Count-Control Line
- Bounce elimination switch
- Storage Registers
- Functionally equivalent to the MC10/100EL29
- 2 – Bit synchronous counter