SN74LV574ADWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Base Part Number | 74LV574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Clock Frequency | 175MHz |
| Propagation Delay | 23 ns |
| Turn On Delay Time | 4.8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 16mA 16mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.8pF |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 45000000Hz |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV574ADWR Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tape & Reel (TR). There is a Tri-State, Non-Invertedoutput configured with it. There is a trigger configured with Positive Edge. Surface Mountis positioned in the way of this electronic part. Powered by a 2V~5.5Vvolt supply, it operates as follows. Currently, the operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74LV series. In order for it to function properly, its output frequency should not exceed 175MHz. A total of 1elements are present in it. There is 20μA quiescent consumption. There are 20 terminations,Members of the 74LV574family make up this object. A voltage of 2.5V is used to power it. This T flip flop has a capacitance of 1.8pF farads at the input. In this case, the D flip flop belongs to the LV/LV-A/LVX/Hfamily. In this case, the electronic component is mounted in the way of Surface Mount. It is designed with 20 pins. This device's clock edge trigger type is Positive Edge. This part is included in FF/Latches. An electronic part designed with 8bits is used in this application. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Normal operation requires a supply voltage (Vsup) above 2V. Due to its superior flexibility, it uses 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. This flip flop has a total of 2ports. This T flip flop features a maximum design flexibility due to its output current of 16mA. The number of input lines is 3.
SN74LV574ADWR Features
Tape & Reel (TR) package
74LV series
20 pins
8 Bits
SN74LV574ADWR Applications
There are a lot of Texas Instruments SN74LV574ADWR Flip Flops applications.
- Reduced system switching noise
- High Performance Logic for test systems
- Common Clocks
- Balanced 24 mA output drivers
- QML qualified product
- Consumer
- Functionally equivalent to the MC10/100EL29
- Buffered Clock
- Frequency Divider circuits
- Automotive
